质子交换膜燃料电池
炭黑
催化作用
电化学
氢溢流
糠醛
电催化剂
无机化学
电导率
氧化物
金属
化学工程
材料科学
化学
选择性
有机化学
电极
物理化学
天然橡胶
工程类
作者
Sarah Carl,Krysta Waldrop,Peter N. Pintauro,Levi T. Thompson,William Abraham Tarpeh
标识
DOI:10.1002/celc.201901314
摘要
Abstract Conventional thermocatalytic hydrogenation employs high temperatures and pressures and often exhibits low selectivity toward desired products. Electrochemical hydrogenation can reduce energy input by operating at ambient conditions and improving process control and selectivity; however, electrocatalysts face stability and conductivity limitations. To overcome these obstacles, we physically mixed a traditional electrocatalyst (Pd black) with a hydrogenation‐active metal (Pd) supported on a conventional metal oxide support (alumina, Al2O3) and investigated electrochemical hydrogenation of furfural, a model biomass compound. Experiments were conducted in a proton exchange membrane (PEM) reactor, in which synthesized electrocatalysts were used as cathodes. Catalysts with Pd black and varying loadings of Pd on Al2O3 were used to determine the impact of hydrogen spillover on electrocatalytic hydrogenation mechanisms, selectivity, and rates. Observed hydrogenation rates and selectivities were linked to structural and compositional properties of the catalyst mixtures. Of the Pd black cathodes tested, 5 wt % Pd/Al2O3 exhibited production rates as high as pure Pd black and higher selectivity towards completely hydrogenated products. Improved selectivity and rates were attributed to a synergistic interaction between Pd black and 5 wt % Pd/Al2O3 in which Pd/Al2O3 increased the number of active sites, while Pd black provided stable conductivity.
科研通智能强力驱动
Strongly Powered by AbleSci AI