Radiographic Quantification of Safe Zones for Screw Placement in the Femoral Neck: A Computed Tomography–Based Analysis

Objectives: The purpose of this study is to design a radiographic map of the femoral neck showing proportion-based locations of the safe zones for screw placement with widest bony extents in anteroposterior and lateral radiographs using normal computed tomography–based data. Methods: We analyzed computed tomography–based studies of 50 intact normal proximal femora equally from male and female subjects. Using software-developed radiographs, the proportionate locations of the maximal anteroposterior and cephalocaudal extents in both constricted zones were measured. The width of the femoral neck in the measurement zone was taken as the reference for calculation of proportions. Results: For anteroposterior radiographs, the anteroposterior safe zones in the femoral neck are located at the gradients of 34.21% and 34.33% from the superior border in midcervical and basicervical regions, respectively. In lateral radiographs, they correlate with the visible anterior extent of femoral neck and lie at a gradient of 7.16% and 11.79% from the visible posterior border in midcervical and basicervical regions, respectively. In lateral radiographs, the calcar-based cephalocaudal safe zone was located at the gradients of 43.49% and 39.53% from the visible posterior border in midcervical and basicervical regions, respectively. In anteroposterior radiographs, cephalic limit of the calcar-based safe zone is located at the gradients of 9.63% and 17.82% from the superior border in midcervical and basicervical regions, respectively. Conclusions: Radiographic margins cannot be reliably trusted for screw fixation of femoral neck fractures. The proportionate locations of the anteroposterior and calcar-based cephalocaudal safe zones with widest bone stock in anteroposterior and lateral fluoroscopic projections can help in the safe placement of screws for fixation of femoral neck fractures.