Effect of Insert Angles on Cutting Tool Geometry

插入(复合材料) 几何学 夹紧 基础(拓扑) 坐标系 交叉口(航空) 线程(计算) 工程制图 职位(财务) 联动装置(软件) 机械工程 机制(生物学) 旋转(数学) 计算机科学 工程类 数学 物理 数学分析 生物化学 化学 财务 量子力学 经济 基因 航空航天工程
作者
S. V. Shvets,Viktor P. Astakhov
出处
期刊:Журнал інженерних наук [Sumy State University]
被引量:4
标识
DOI:10.21272/jes.2020.7(2).a1
摘要

An analysis of publications has shown that mechanically clamped indexable inserts are predominantly used in modern tool manufacturing. Each insert has its shape and geometry in the tool coordinate system. The static system’s required geometry is achieved by the tilting of the insert pocket in the radial and axial directions. Therefore, it is of great importance in the tool design to know the relationships between the insert’s geometry parameters in the tool coordinate system where the geometry paraments of the insert are defined and working geometry parameters of the tool defined in the static coordinate system. The paper presents the developed methodology for determining the insert pocket base surface position to ensure the required values of the tool geometry parameters of the selected indexable insert in the static coordinate system. The graphs of the dependence of each of the angles of the insert geometry on the angles of rotation of this insert in the front and profile planes are presented as the level lines for practical use. Using these graphs, one can optimize all geometric insertion parameters in the static coordinate system. The model of the calculations of the mechanism of the insert clamping by a screw is developed. The basic size and tolerance of the output link determine the distance from the intersection line of the base surfaces to the thread axis on the pocket and the minimum amount of the screw stroke on the insert clamping in the pocket. Keywords: indexable insert, cutting tool, coordinate system, base surfaces, geometric parameters.
最长约 10秒,即可获得该文献文件

科研通智能强力驱动
Strongly Powered by AbleSci AI
更新
大幅提高文件上传限制,最高150M (2024-4-1)

科研通是完全免费的文献互助平台,具备全网最快的应助速度,最高的求助完成率。 对每一个文献求助,科研通都将尽心尽力,给求助人一个满意的交代。
实时播报
阿海发布了新的文献求助10
1秒前
迷路伊完成签到 ,获得积分10
2秒前
高强发布了新的文献求助10
3秒前
3秒前
4秒前
4秒前
awu发布了新的文献求助10
4秒前
浴火重生发布了新的文献求助10
4秒前
w_发布了新的文献求助10
5秒前
as完成签到,获得积分20
7秒前
哈哈哈哈完成签到,获得积分20
7秒前
maox1aoxin应助anhuiwsy采纳,获得30
8秒前
锅包肉发布了新的文献求助10
8秒前
jie完成签到,获得积分20
8秒前
luoqin发布了新的文献求助10
8秒前
9秒前
10秒前
eli完成签到,获得积分10
10秒前
10秒前
林宥嘉应助黄辉冯采纳,获得10
10秒前
jie发布了新的文献求助10
10秒前
道友请留步完成签到 ,获得积分10
10秒前
11秒前
丘比特应助合适依秋采纳,获得10
11秒前
爱吃树梅子完成签到,获得积分10
12秒前
xiaowang发布了新的文献求助10
12秒前
12秒前
12秒前
12秒前
34发布了新的文献求助10
13秒前
SciGPT应助林上草采纳,获得10
13秒前
哈哈哈哈发布了新的文献求助10
14秒前
赘婿应助awu采纳,获得10
14秒前
14秒前
14秒前
袁同学完成签到,获得积分10
15秒前
cst发布了新的文献求助10
16秒前
17秒前
dadadada发布了新的文献求助10
17秒前
银角大王发布了新的文献求助100
17秒前
高分求助中
The three stars each: the Astrolabes and related texts 500
Revolutions 400
Diffusion in Solids: Key Topics in Materials Science and Engineering 400
Phase Diagrams: Key Topics in Materials Science and Engineering 400
Psychological Warfare Operations at Lower Echelons in the Eighth Army, July 1952 – July 1953 400
少脉山油柑叶的化学成分研究 350
微化工技术 300
热门求助领域 (近24小时)
化学 材料科学 医学 生物 有机化学 工程类 生物化学 纳米技术 物理 内科学 计算机科学 化学工程 复合材料 遗传学 基因 物理化学 催化作用 电极 光电子学 量子力学
热门帖子
关注 科研通微信公众号,转发送积分 2442036
求助须知:如何正确求助?哪些是违规求助? 2119584
关于积分的说明 5385037
捐赠科研通 1847736
什么是DOI,文献DOI怎么找? 919359
版权声明 562008
科研通“疑难数据库(出版商)”最低求助积分说明 491758