热解
生物炭
产量(工程)
材料科学
活化能
木炭
化学
化学工程
有机化学
复合材料
冶金
工程类
作者
Dengyu Chen,Yanjun Li,Kehui Cen,Min Luo,Hongyan Li,Lu Bin
标识
DOI:10.1016/j.biortech.2016.07.049
摘要
The pyrolysis of poplar wood were comprehensively investigated at different pyrolysis temperatures (400, 450, 500, 550, and 600°C) and at different heating rates (10, 30, and 50°C/min). The results showed that BET surface area of biochar, the HHV of non-condensable gas and bio-oil reached the maximum values of 411.06m(2)/g, 14.56MJ/m(3), and 14.39MJ/kg, under the condition of 600°C and 30°C/min, 600°C and 50°C/min, and 550°C and 50°C/min, respectively. It was conducive to obtain high mass and energy yield of bio-oil at 500°C and higher heating rate, while lower pyrolysis temperature and heating rate contributed towards obtaining both higher mass yield and energy yield of biochar. However, higher pyrolysis temperature and heating rate contributed to obtain both higher mass yield and energy yield of the non-condensable gas. In general, compared to the heating rate, the pyrolysis temperature had more effect on the product properties.
科研通智能强力驱动
Strongly Powered by AbleSci AI