Effective Application of Magnetic Material Based on Metamaterial Absorber

We simulate, fabricate and measure a microwave absorber by introducing metamaterial design method to magnetic material. The proposed absorber is composed of periodic copper wire array, magnetic material coated on copper wires, a foam substrate and a bottom metal plane. The results show a nearly perfect absorption peak around 8.7GHz (simulated) and 7.6GHz (measured). Even though the electric and magnetic field distribution indicate that the absorption is a typical metamaterial absorption, the power loss is neither Ohmic nor dielectric loss but magnetic loss, which is different from typical metamaterial absorber. The skillful introduction of the magnetic loss improves the absorption performance, including the absorption bandwidth and intensity. The designed absorber shows an effective application of the magnetic material, which is only 1/60000 volume proportion of the total absorber. Dependences of the absorption on frequency and the coating volume of the magnetic material manifest that the coated magnetic material can adjust the absorption peak position and intensity. The absorber can be an attractive candidate of electromagnetic wave absorber.