制作
材料科学
曲面(拓扑)
纳米技术
国家(计算机科学)
机械
化学物理
光电子学
物理
几何学
计算机科学
算法
数学
医学
病理
替代医学
作者
Jinlong Song,Mingqian Gao,Changlin Zhao,Yao Lu,Liu Huang,Xin Liu,Claire J. Carmalt,Xu Deng,Ivan P. Parkin
出处
期刊:ACS Nano
[American Chemical Society]
日期:2017-08-25
卷期号:11 (9): 9259-9267
被引量:165
标识
DOI:10.1021/acsnano.7b04494
摘要
Superhydrophobic pillar arrays, which can generate the droplet pancake bouncing phenomenon with reduced liquid-solid contact time, have huge application prospects in anti-icing of aircraft wings from freezing rain. However, the previously reported pillar arrays, suitable for obtaining pancake bouncing, have a diameter ≤100 μm and height-diameter ratio >10, which are difficult to fabricate over a large area. Here, we have systematically studied the influence of the dimension of the superhydrophobic pillar arrays on the bouncing dynamics of water droplets. We show that the typical pancake bouncing with 57.8% reduction in contact time with the surface was observed on the superhydrophobic pillar arrays with 1.05 mm diameter, 0.8 mm height, and 0.25 mm space. Such pillar arrays with millimeter diameter and <1 height-diameter ratio can be easily fabricated over large areas. Further, a simple replication-spraying method was developed for the large-area fabrication of the superhydrophobic pillar arrays to induce pancake bouncing. No sacrificial layer was needed to reduce the adhesion in the replication processes. Since the bouncing dynamics were rather sensitive to the space between the pillars, a method to control the contact time, bouncing shape, horizontal bouncing direction, and reversible switch between pancake bouncing and conventional bouncing was realized by adjusting the inclination angle of the shape memory polymer pillars.
科研通智能强力驱动
Strongly Powered by AbleSci AI