Influence of Applied Load and Sliding Velocity on Tribocorrosion Behavior of 7075-T6 Aluminum Alloy

In this paper, the tribocorrosion behavior and synergistic effect of 7075-T6 aluminum alloy under different applied loads (100, 150, and 200 N) and sliding velocities (100, 150, and 200 rpm) were studied in a 3.5 wt.% NaCl solution. Tribocorrosion experiments were conducted in a tribobocorrosion system with pin-on-disc testing. The results show that the interaction between applied load and sliding velocity significantly affects the mechanical and electrochemical properties of 7075-T6 aluminum alloy. Increases in sliding velocity and applied load will accelerate the corrosion. Due to the synergistic effect of corrosion and wear, the wear rate is almost unchanged as the sliding velocity increases. When the applied load increased from 100 to 200 N, the wear rate increased from 1.97 × 10−5 to 2.08 × 10−5 mm3/N·m, and the delamination wear phenomenon was aggravated.