计算流体力学
转速
气流
材料科学
入口
机械
体积流量
空速
CFD-DEM公司
水泥
粒度分布
复合材料
粒径
工艺工程
机械工程
环境科学
化学工程
工程类
物理
航空航天工程
作者
Mohamadreza Esmaeilpour,Ali Mohebbi,Vahab Ghalandari
出处
期刊:Particuology
[Elsevier BV]
日期:2023-11-03
卷期号:89: 172-184
被引量:9
标识
DOI:10.1016/j.partic.2023.10.011
摘要
An air classifier is one of the main and effective devices in cement industry. In this study, a three-dimensional, steady and two-phase (solid-gas) computational fluid dynamics (CFD) simulation was performed to optimize the performance of this device in the Kerman Momtazan cement plant, Iran. After the validation of CFD results, the air flow field and air path lines between fixed blades were checked carefully and the non-uniformity in velocity distribution and the formation of vortex flows between the blades close to particle inlets were observed. The study tried to improve the device efficiency by changing the method of entering particles into the device, resulting in a reduction in air classifier electrical energy consumption (from 41 to 35 (kW h)/t) and an increase in production rate (from 203 to 214 t/h). Additionally, the study investigated the effects of other modifiable operating conditions like rotary cage rotation speed, pressure difference, and inlet air temperature on the particle size distribution and classifier efficiency. The results showed that increasing the cage rotation speed decreased the product rate and the product particles mean diameter while increasing pressure difference or increasing temperature increased the product rate and the product particles mean diameter. It was concluded that these modifiable operating conditions can significantly affect the performance of the air classifier in the cement industry.
科研通智能强力驱动
Strongly Powered by AbleSci AI