材料科学
磁流变液
表面粗糙度
6063铝合金
激发
合金
复合材料
表面光洁度
磁场
表面处理
冶金
电气工程
工程类
量子力学
物理
作者
Yiming Fang,Jinzhong Wu
出处
期刊:Materials
[Multidisciplinary Digital Publishing Institute]
日期:2024-06-01
卷期号:17 (11): 2670-2670
被引量:4
摘要
The present work is aimed at studying the effects of the magnetorheological finishing process, using a low-frequency alternating magnetic field, on the finishing performance of 6063 aluminum alloy. The study investigates the influence of key excitation parameters such as current, frequency, excitation gap, and iron powder diameter on the material removal and surface roughness (Ra) of the finished workpiece by experiments. This study employs a single-factor experimental method, and the finish surface is analyzed by a Zigo non-contact white light interferometer. The magnetic field strength in the processing area increases with the increase in the excitation current and decreases with the increase in the excitation gap. When the current frequency is set to 1 Hz, the circulation and renewal of abrasives in the magnetic cluster is most sufficient, resulting in the optimal surface roughness value for the workpiece. According to the experimental results of the excitation parameters, more suitable process parameters were selected for a two-stage finishing experiment. The surface roughness of 6063 aluminum alloy was improved from 285 nm to 3.54 nm. Experimental results highlighted that the magnetorheological finishing using a low-frequency alternating magnetic field is a potential technique for obtaining nano-scale finishing of the 6063 aluminum alloy.
科研通智能强力驱动
Strongly Powered by AbleSci AI