材料科学
结晶度
高功率脉冲磁控溅射
薄膜
退火(玻璃)
电子迁移率
溅射沉积
激光器
光电子学
霍尔效应
苏打石灰玻璃
带隙
微观结构
脉冲激光沉积
腔磁控管
溅射
分析化学(期刊)
复合材料
光学
电阻率和电导率
纳米技术
化学
电气工程
物理
工程类
色谱法
作者
J. Rezek,Martin Kučera,Tomáš Kozák,R. Čerstvý,A. Franc,Pavel Baroch
标识
DOI:10.1016/j.apsusc.2024.160255
摘要
In presented work, a reactive high-power impulse magnetron sputtering (r-HiPIMS) was used for high-rate deposition (≈ 170 nm/min) of Cu2O films. Films were deposited on a standard soda-lime glass (SLG) substrate at a temperature of 190 °C. As-deposited films exhibit poor hole mobility in the orders of ≈ 1 cm2/Vs. We have systematically studied the effect of laser thermal annealing (LTA) procedure performed using high-power infrared laser under different laser parameters (number of pulses, length of the pulse). We have found, LTA procedure could significantly enhance the hole mobility (up to 24 cm2/Vs in our case). We have also fitted the results of a temperature-dependent Hall measurement to clarify the mechanism of the reported increase in hole mobility. Moreover, we have discussed the effect of the LTA procedure on microstructure (crystallinity, surface morphology) and on the value of optical band gap.
科研通智能强力驱动
Strongly Powered by AbleSci AI