Simulation of steel corrosion and iron yield in LFR with lead coolant

Liquid lead is the main coolant of the fourth generation of advanced nuclear energy system — lead cooled fast reactor (LFR), due to its good neutron economy, high heat transfer performance, stable chemical properties, constant low melting point, high boiling point, etc. Although there are many advantages, the corrosion of metal materials in liquid lead is one of the decisive factors restricting the development of lead cooled fast reactor. In this study, an engineering model for simulating the oxide film growth in liquid lead coolant is established, and the time-dependence of steel flux is analyzed based on the experimental data in the literature. The effects of circuit temperature, hydraulic diameter of section simulated, coolant velocity and steel types on the steel corrosion were investigated. The results showed that the oxide film formed on the steels is of micron grade and the diffusion yield of iron produced in pure lead coolant is of kilogram grade after ten years’ corrosion. The temperature and the coolant velocity have significant effects on the steel corrosion while the effect of hydraulic diameter is mild. Also, the steel types affect the growth of oxide film. The findings provide basic data for the evaluation of radioactive corrosion products of LFR.