亲爱的研友该休息了!由于当前在线用户较少,发布求助请尽量完整地填写文献信息,科研通机器人24小时在线,伴您度过漫漫科研夜!身体可是革命的本钱,早点休息,好梦!

Evaluation of mechanical and microstructural properties for laser powder-bed fusion 316L

作者
Philip Eriksson
出处
期刊:KTH Royal Institute of Technology - KTH Publication Database DiVA [KTH Royal Institute of Technology]
被引量:7
摘要

This thesis work was done to get a fundamental knowledge of the mechanical and microstructural properties of 316L stainless steel fabricated with the additive manufacturing technique, laser powder-bed fusion (L-PBF). The aims of the thesis were to study the mechanical and microstructural properties in two different building orientations for samples built in two different machines, and to summarize mechanical data from previous research on additive manufactured 316L. Additive manufacturing (AM) or 3D-printing, is a manufacturing technique that in recent years has been adopted by the industry due to the complexity of parts that can be built and the wide range of materials that can be used. This have made it important to understand the behaviour and properties of the material, since the material differs from conventionally produced material. This also adds to 316L, which is an austenitic stainless steel used in corrosive environments. To study the effect of the building orientation, samples of 316L were built in different orientations on the build plate. The density and amount of pores were also measured. Tensile testing and Charpy-V testing were made at room temperature. Vickers hardness was also measured. Microstructure and fracture surfaces were examined using light optical microscope (LOM) and scanning electron microscope (SEM). The microstructure of the 316L made with L-PBF was found to have meltpools with coarser grains inside them, sometime spanning over several meltpools. Inside these coarser grains was a finer cellular/columnar sub-grain structure. The tensile properties were found to be anisotropic with higher strength values in the orientation perpendicular to the building direction. Also high dense samples had higher tensile properties than low dense samples. The impact toughness was found to be influenced negatively by high porosity. Hardness was similar in different orientations, but lower for less dense samples. Defects due to lack of fusing of particles were found on both the microstructure sample surfaces and fracture surfaces. The values from this study compare well with previous reported research findings.

科研通智能强力驱动
Strongly Powered by AbleSci AI
科研通是完全免费的文献互助平台,具备全网最快的应助速度,最高的求助完成率。 对每一个文献求助,科研通都将尽心尽力,给求助人一个满意的交代。
实时播报
2秒前
26秒前
善良的寒珊完成签到,获得积分10
26秒前
隐形曼青的应助被科研通管家采纳,获得10
33秒前
温柔的太君完成签到,获得积分10
45秒前
48秒前
小羊羊完成签到,获得积分10
54秒前
光亮靳完成签到,获得积分10
59秒前
坦率寻菡完成签到,获得积分10
1分钟前
1分钟前
Voiceless完成签到,获得积分10
1分钟前
1分钟前
水北完成签到,获得积分10
1分钟前
1分钟前
兴奋筮完成签到,获得积分10
1分钟前
1分钟前
爆米花的应助被懦弱的大有采纳,获得10
1分钟前
2分钟前
2分钟前
懦弱的大有完成签到,获得积分20
2分钟前
长情的小蕾完成签到,获得积分10
2分钟前
2分钟前
2分钟前
Jasper的应助被五岁的哈士奇采纳,获得10
2分钟前
哪块小饼干完成签到,获得积分10
2分钟前
dddj完成签到,获得积分10
2分钟前
null的应助被科研通管家采纳,获得20
2分钟前
GingerF的应助被科研通管家采纳,获得100
2分钟前
2分钟前
心灵美涵柳完成签到,获得积分10
2分钟前
2分钟前
顺心的傲松完成签到,获得积分10
2分钟前
和谐的不乐完成签到,获得积分10
3分钟前
3分钟前
Kishi完成签到,获得积分10
3分钟前
调皮雅柔完成签到,获得积分10
3分钟前
3分钟前
3分钟前
3分钟前
4分钟前
高分求助中
(应助此贴封号)【重要!!请各用户(尤其是新用户)详细阅读】【科研通的精品贴汇总】 10000
拉伸高分子熔体中缠结行为的模拟和小角中子散射研究 1700
The World Atlas of Wine 9th edition 1000
奈特基础组织学:配套组织病理学(第4版)(Netter's Essential Histology With Correlated Histopathology) 800
John McDowells Bildungstheorie 800
Social Psychology in the Real World 600
八旗制度の研究 600
热门求助领域 (近24小时)
化学 材料科学 医学 生物 纳米技术 计算机科学 工程类 有机化学 化学工程 生物化学 物理 复合材料 内科学 催化作用 光电子学 人工智能 细胞生物学 无机化学 物理化学 数学
热门帖子
关注 科研通微信公众号,转发送积分 8179920
求助须知:如何正确求助?哪些是违规求助? 9570103
关于积分的说明 21808354
捐赠科研通 7775756
什么是DOI,文献DOI怎么找? 3433193
关于科研通互助平台的介绍 2557347
邀请新用户注册赠送积分活动 2478918