雷亚克夫
热解
烧焦
等温过程
tar(计算)
大气温度范围
分子动力学
化学工程
反应速率
产品分销
化学
煤
热力学
活化能
有机化学
热分解
燃烧
动力学
计算化学
催化作用
工程类
物理
程序设计语言
原子间势
计算机科学
作者
Fang Xu,Hui Liu,Qing Wang,Shuo Pan,Deng Zhao,Ying Liu
出处
期刊:Fuel
[Elsevier BV]
日期:2019-11-01
卷期号:256: 115884-115884
被引量:32
标识
DOI:10.1016/j.fuel.2019.115884
摘要
Compared with the isothermal pyrolysis, non-isothermal pyrolysis is more accurate and efficient, and closer to the actual reaction process. To better understand the pyrolysis mechanism of lignite, a series of ReaxFF molecular dynamics (ReaxFF-MD) simulations were performed within the temperature range of 300–3000 K at different heating rates. The results indicated that the secondary reaction of tar took place when the temperature was above 2400 K at a low heating rate (2 K/ps). In comparison with light tar, more heavy tar was converted to gas or char through further decomposition or condensation reaction. The influence of heating rate on pyrolysis reaction was investigated at the heating rates of 2, 10, 50 and 100 K/ps. In the low heating rate range (below 10 K/ps), the heating rate exhibited a prominent influence on the product distribution. Moreover, more tar and pyrolysis gas were generated at low temperatures (below 2400 K) compared to those at high heating rates. The reaction mechanisms of typical lignite pyrolysis products (C2H4 and phenols) were explored. The formation of C2H4 was attributed to the presence of large amounts of methylene carbon in lignite. Possible formation and transformation pathways of phenols have been proposed, and the simulation results were found to be consistent with the evolution of gases.
科研通智能强力驱动
Strongly Powered by AbleSci AI