响应度
辐照度
波长
标准差
差速器(机械装置)
光学
物理
时滞与积分
计算物理学
材料科学
数学
光电探测器
统计
热力学
作者
David Hinken,Ingo Kröger,Stefan Winter,Rolf Brendel,Karsten Bothe
标识
DOI:10.1088/1361-6501/ab34ef
摘要
Abstract The spectral responsivity of solar cells is widely used for cell analysis or calibration purposes. According to the IEC60904-8:2014 standard, the reference method for the determination of is the complete differential spectral responsivity approach. For this approach, the differential spectral responsivity is measured as a function of wavelength and bias irradiance. To obtain the spectral responsivity related to standard test conditions the IEC60904-8:2014 standard recommends to integrate via bias current for each wavelength. We show that this integration is wrong. It lacks analytical derivation and provides faulty curves for non-linear solar cells. We prove analytically and by means of simulations that the correct way of calculation is either the integration of via the bias irradiance or the integration of via the bias current , with being the AMx-weighted (e.g. AM1.5G or AM1.5D) differential responsivity. A simulation of the differential spectral responsivity of a strongly non-linear solar cell demonstrates deviations of up to 30% for (the wrong) integration of via at some wavelengths, corresponding to a deviation in the short-circuit current of up to 3.0%.
科研通智能强力驱动
Strongly Powered by AbleSci AI