方位(导航)
加速度计
断层(地质)
信号(编程语言)
故障检测与隔离
加速度
信号处理
可靠性(半导体)
计算机科学
控制理论(社会学)
工程类
结构工程
人工智能
电子工程
数字信号处理
地质学
物理
执行机构
程序设计语言
功率(物理)
控制(管理)
操作系统
地震学
经典力学
量子力学
作者
Olga L. Ibryaeva,Vladimir Vladimirovich Sinitsin,Valeria Sakovskaya,Victoria A. Eremeeva
标识
DOI:10.1016/j.measen.2021.100210
摘要
The mechanical system reliability depends on efficiency incipient fault detection of rolling bearings. Traditionally, fault detection based on signal processing methods from accelerometers, which are mounted on the housing. In contrast, accelerations of the rotating shaft are more sensitive to incipient faults of the bearing. However, the design of some mechanisms limits the measuring accelerations of the shaft near each bearing. This paper proposes a novel hybrid processing shaft accelerations method for faulting diagnosis of several rolling bearings fixed on the same shaft. The method executes mixed processing of linear and angular accelerations by CNN and MLP. The method allows to detect and localize defects of each bearing based on signals from the one measured point. The experimental results show the method allows to detect the faulty bearing with an accuracy of 99,3%. Moreover, the method allows localizing the bearing fault with an accuracy of 97%.
科研通智能强力驱动
Strongly Powered by AbleSci AI