冰晶石
电解
材料科学
原材料
合金
电解质
冶金
铝
电解槽
化学工程
电极
化学
工程类
物理化学
有机化学
作者
Ana María Martínez,Samuel Senanu,Henrik Gudbrandsen,Karen Sende Osen,Anne Støre,Zhaohui Wang,Ole Sigmund Kjos
出处
期刊:
[Multidisciplinary Digital Publishing Institute]
日期:2021-11-30
卷期号:: 41-41
被引量:1
标识
DOI:10.3390/materproc2021005041
摘要
Electrolysis experiments to produce Al-Sc alloys were carried out in galvanostatic mode using a cryolitic melt with a NaF/AlF3 molar ratio of 2.2 at 980 °C, using both synthetic and waste feeds. After elucidation of the cryolite electrolyte bath chemistry when adding Sc2O3, small-laboratory scale trials allowed for the demonstration of the process and the study and for the optimisation of the electrolysis parameters. Experiments in large-scale electrolysis cells allowed us to run long-term trials in continuous operation, while the on-line monitoring of the cell off-gases ensured the environmentally benign performance of the process. The aluminium product obtained contained 0.6–2.6 wt% Sc, depending on the current density applied. The material is suited to prepare Al-Sc master alloys for 3D printing powders.
科研通智能强力驱动
Strongly Powered by AbleSci AI