蠕动泵
微塑料
滤波器(信号处理)
污染
傅里叶变换红外光谱
材料科学
采样(信号处理)
聚乙烯
过滤(数学)
环境科学
复合材料
化学
环境化学
数学
化学工程
工程类
机械工程
生态学
电气工程
生物
统计
作者
Z. Harrold,Monica M. Arienzo,Meghan Collins,Julia M. Davidson,Xuelian Bai,Suja Sukumaran,John W. Umek
出处
期刊:ACS ES&T water
[American Chemical Society]
日期:2022-01-31
卷期号:2 (2): 268-277
被引量:25
标识
DOI:10.1021/acsestwater.1c00270
摘要
Sampling the aquatic environment for microplastic concentration is inherently difficult because of variations in microplastic concentration, shape, and density and the potential for contamination. We present an assessment of a method for microplastic sampling that uses a peristaltic pump to pump water through a series of in-line stainless-steel mesh filters. Following filtration, the stainless-steel filters were treated using previously published methods to isolate microplastics, adjusted for the stainless-steel mesh filters. Microplastics were identified using micro-Fourier transform infrared (μFTIR) spectroscopy in transmission mode. This method was tested in the laboratory using standard polyethylene beads and was applied to two sample sites at the Las Vegas Wash in Nevada. The results showed that 70% of the polyethylene beads were recovered after the peristaltic pump and laboratory steps with minimal blank contamination. The advantages of the peristaltic pump sampling method are it (1) supports a range of sample volumes, (2) reduces sample handling, (3) reduces the potential for contamination, (4) provides flexibility in sampling locations, and (5) supports a variety of filter types. Using stainless-steel mesh filters allows for (1) streamlined and direct field-to-laboratory sample processing, (2) μFTIR transmission mode analysis of filter-mounted microplastics, and (3) reduced filter and sample processing costs.
科研通智能强力驱动
Strongly Powered by AbleSci AI