金属陶瓷
材料科学
阳极
渗氮
氧化钇稳定氧化锆
立方氧化锆
微观结构
固体氧化物燃料电池
氧化物
氨
化学工程
冶金
电化学
无机化学
图层(电子)
复合材料
陶瓷
电极
有机化学
化学
工程类
物理化学
作者
Jun Yang,Ahmed Fathi Salem Molouk,Takeou Okanishi,Hiroki Muroyama,Toshiaki Matsui,Koichi Eguchi
标识
DOI:10.1021/acsami.5b11122
摘要
In recent years, solid oxide fuel cells fueled with ammonia have been attracting intensive attention. In this work, ammonia fuel was supplied to the Ni/yttria-stabilized zirconia (YSZ) cermet anode at 600 and 700 °C, and the change of electrochemical performance and microstructure under the open-circuit state was studied in detail. The influence of ammonia exposure on the microstructure of Ni was also investigated by using Ni/YSZ powder and Ni film deposited on a YSZ disk. The obtained results demonstrated that Ni in the cermet anode was partially nitrided under an ammonia atmosphere, which considerably roughened the Ni surface. Moreover, the destruction of the anode support layer was confirmed for the anode-supported cell upon the temperature cycling test between 600 and 700 °C because of the nitriding phenomenon of Ni, resulting in severe performance degradation.
科研通智能强力驱动
Strongly Powered by AbleSci AI