Physics of moderately stretched electrified jets in electrohydrodynamic jet printing

Electrohydrodynamic (EHD) jet printing involves the deposition of a liquid jet issuing from a needle stretched under the effect of a strong electric field between the needle and a collector plate. Unlike the geometrically independent classical cone-jet observed at low flow rates and high applied electric fields, at a relatively high flow rate and moderate electric field, EHD jets are moderately stretched. Jetting characteristics of such moderately stretched EHD jets differ from the typical cone-jet due to the nonlocalized cone-to-jet transition. Hence, we describe the physics of the moderately stretched EHD jet applicable to the EHD jet printing process through numerical solutions of a quasi-one-dimensional model of the EHD jet and experiments. Through comparison with experimental measurements, we show that our simulations correctly predict the jet shape for varying flow rates and applied potential difference. We present the physical mechanism of inertia-dominated slender EHD jets based on the dominant driving and resisting forces and relevant dimensionless numbers. We show that the slender EHD jet stretches and accelerates primarily due to the balance of driving tangential electric shear and resisting inertia forces in the developed jet region, whereas in the vicinity of the needle, driving charge repulsion and resisting surface tension forces govern the cone shape. The findings of this study can help in operational understanding and better control of the EHD jet printing process.