抛光
蓝宝石
材料科学
表面粗糙度
泥浆
复合材料
光学
物理
激光器
作者
Quan Zhai,Wenjie Zhai,Tianhe Deng
标识
DOI:10.1016/j.triboint.2023.108318
摘要
To improve the polishing quality and optimize the polishing process of sapphire hemisphere, the ultrasound assisted magneto-rheological polishing (UAMP) of sapphire hemisphere surface was studied from the aspects of simulation and experiment in this paper. The orthogonal experiment was designed for the key parameters in polishing, and range analysis, variance analysis and grey correlation analysis were performed to summarize the optimal polishing processes under different evaluation indicators, as well as determine the influencing orders and significances of all parameters on evaluation indicators. The results showed that the material removal rate (MRR), surface roughness Ra and surface figure precision PV of sapphire hemisphere after polished by the optimal polishing process of MRR indicator are 2.239 µm/h, 5.488 nm and 1.185λ, respectively, and they are 0.411 µm/h, 0.933 nm and 0.324λ for the sapphire hemisphere polished by the optimal polishing process of Ra and comprehensive effect indicators, the surface figure precision is enhanced by more than twenty times compared with the initial sapphire hemisphere before polishing. The influence of polishing parameters on the UAMP results of sapphire hemisphere surface is investigated. Both MRR and Ra of sapphire hemisphere surface increase with the rotation velocity of polishing cover and the volume fraction of abrasives, while they decrease with the swing period and swing angle of polishing cover. The experiment results are in good agreement with the simulation results, which verifies the reliability of the MRR and Ra models.
科研通智能强力驱动
Strongly Powered by AbleSci AI