Numerical Simulation of Tail Over-Fire Air Supply of a Grate Biomass Boiler

By taking a 130 t/h water-cooled grate biomass boiler as the research object, the ANSYS software is applied to simulate the effects of the tail burnout air’s incidence angle, wind speed, and pipe diameter on flow field distribution in the furnace, the movement of unburned carbon particles at the tail of the grate under cold operation. The influence rules of the incidence angle, pipe diameter, and wind speed of the tail burnout air on the combustion in the furnace and the movement of the tail particles were obtained. The results show that the setting of burnout air at the tail of the grate can better organize the air flow field at the grate tail, change the particle distribution, prevent small density particles from directly falling into the ash hopper, and prolong the residence time of particles on the grate. Under the study conditions, with an increase in the outlet velocity and the pipe diameter of the tail burnout air, as the movement degree and the burnout degree of grate particles increase, the boiler efficiency increases. With an increase in the incidence angle of the tail burnout air, the flow field in the furnace and the reduction ratio of the tail particles increases at first and then decreases, and the optimal incidence angle is 11–13°.