材料科学
焊接
激光束焊接
箔法
微观结构
点焊
复合材料
激光器
梁(结构)
光纤激光器
保护气体
冶金
光学
纤维
物理
作者
Danbi Song,Ryoonhan Kim,K.D. Choi,Dongsig Shin,Su-Jin Lee
出处
期刊:Metals
[Multidisciplinary Digital Publishing Institute]
日期:2023-05-08
卷期号:13 (5): 916-916
被引量:14
摘要
In this study, a fiber laser at a wavelength of 1070 nm with different beam shapes (spot, dough-nut, and spot-wobble) was used to weld thin 316 L stainless steel foils. The welding speed was varied from 400 to 1000 mm/s in the absence of shielding gas. The weld geometry, microstructure, lap shear strength, and crystallographic grain structure of the micro-joints were analyzed and correlated with the beam shape and welding speed. The results indicate that the laser beam shape significantly affected the weld width and penetration depth, and the best welding speed was 500 mm/s. This study proved for the first time that a spot-wobble laser beam could achieve better mechanical properties and microstructural characteristics than a doughnut beam during the high-power laser welding of thin-foil stainless steel plates.
科研通智能强力驱动
Strongly Powered by AbleSci AI