材料科学
复合材料
断裂韧性
增韧
断裂(地质)
复合数
微观结构
扫描电子显微镜
韧性
静电纺丝
分层(地质)
聚合物
碳纳米管
纤维
形态学(生物学)
梁(结构)
纵横比(航空)
断裂力学
碳纤维增强聚合物
碳纤维
纳米纤维
脆性
作者
Yingwei Fu,Gongdong Wang,Meng Wang,Aili Zou,Xiaoxuan Bi,Yubin Chen,Lu Feng
摘要
ABSTRACT To enhance the interlaminar fracture toughness of carbon fiber‐reinforced polymer (CFRP) composites, electrospinning was employed to fabricate PES/CNTs/nano‐Al 2 O 3 composite fiber interleaves, which were introduced as interlaminar toughening layers in CFRP laminates. By varying the mass ratio of CNTs to nano‐Al 2 O 3 and the total nanofiller content (0.3–1.0 wt%), the effects of different hybrid configurations on Mode I and Mode II interlaminar fracture behavior were systematically investigated. The morphology of the hybrid structures and the fracture surface microstructure were characterized using scanning electron microscopy (SEM). Interlaminar fracture toughness was evaluated through double cantilever beam (DCB) and end‐notched flexure (ENF) tests. For Mode I fracture, when the CNTs/nano‐Al 2 O 3 mass ratio was 3:2 and the nanofiller content was 0.5 wt%, G IC‐c and G IC‐p increased by 131.72% and 83.90%, respectively. For Mode II fracture, a CNTs/nano‐Al 2 O 3 mass ratio of 2:3 combined with a nanofiller content of 0.7 wt% resulted in a 219.50% increase in G IIC . The results indicate that the nanofillers and PES fibers form a synergistic toughening architecture within the interlaminar region, providing experimental evidence and theoretical support for developing multiscale synergistic toughening systems and optimizing the interlaminar structure design of CFRP composites.
科研通智能强力驱动
Strongly Powered by AbleSci AI