Effects of cavitation jet peening treatment on the residual stress and fatigue properties of SAF2205 cruciform welded joints

Abstract The cruciform welded joint is a weak position of filter press to cause fatigue failure under cyclic conditions. In this study, cavitation jet peening (CJP) treatment is proposed to improve the fatigue life of SAF2205 cruciform welded joints. The effects of different CJP treatment positions on the residual stress, microstructure, and microhardness were studied. The results show that different CJP treatment positions have different on residual stresses and fatigue life. The order of the residual stress in fracture position from large to small is the fully treated specimen, untreated specimen, one‐sided treated specimen, and diagonal treated specimen, which is exactly opposite to the order of fatigue life from large to small. After the diagonal CJP treatment, the fatigue life is increased by up to 242.19%, and the residual stress at the weld toe is reduced by more than 80%. A strengthening layer with thicknesses of about 400 μm is formed.