材料科学
超级电容器
纳米孔
比表面积
化学工程
水溶液
多孔性
微型多孔材料
物理吸附
电解质
储能
氢气储存
石墨烯
电容
体积热力学
比能量
纳米技术
吸附
有机化学
复合材料
电极
物理化学
化学
催化作用
功率(物理)
工程类
物理
量子力学
合金
作者
Srinivas Gadipelli,Christopher A. Howard,Jian Guo,Neal T. Skipper,Hong Zhang,Paul R. Shearing,Dan J. L. Brett
标识
DOI:10.1002/aenm.201903649
摘要
Abstract Nanoporous carbons (NPCs) with engineered specific pore sizes and sufficiently high porosities (both specific surface area and pore volume) are necessary for storing energy in the form of electric charges and molecules. Herein, NPCs, derived from biomass pine‐cones, coffee‐grounds, graphene‐oxide and metal‐organic frameworks, with systematically increased pore width (<1.0 nm to a few nm), micropore volume (0.2–0.9 cm 3 g −1 ) and specific surface area (800–2800 m 2 g −1 ) are presented. Superior CO 2 , H 2, and H 2 O uptakes of 35.0 wt% (≈7.9 mmol g −1 at 273 K), 3.0 wt% (at 77 K) and 85.0 wt% (at 298 K), respectively at 1 bar, are achieved. At controlled microporosity, supercapacitors deliver impressive performance with a capacity of 320 and 230 F g −1 at 500 mA g −1 , in aqueous and organic electrolytes, respectively. Excellent areal capacitance and energy density (>50 Wh kg −1 at high power density, 1000 W kg −1 ) are achieved to form the highest reported values among the range of carbons in the literature. The noteworthy energy storage performance of the NPCs for all five cases (CO 2 , H 2 , H 2 O, and capacitance in aqueous and organic electrolytes) is highlighted by direct comparison to numerous existing porous solids. A further analysis on the specific pore type governed physisorption capacities is presented.
科研通智能强力驱动
Strongly Powered by AbleSci AI