有限元法
材料科学
拉伤
应变计
胶粘剂
光纤布拉格光栅
结构工程
计算机模拟
传输(计算)
涡轮机
纤维
灵敏度(控制系统)
涡轮叶片
复合材料
声学
数值分析
情态动词
机械工程
模态分析
机械
机制(生物学)
作者
Xianhuan Luo,Baowu Zhang,Kai Chen,Lu Peng,Bo Tang,Bing Chai,Jianjun Cui
标识
DOI:10.1038/s41598-026-58637-1
摘要
FBG sensors are widely used in damage monitoring of wind turbine blades. Due to the adhesive layer, strain transfer loss occurs when blade strain is transmitted to the fiber Bragg grating. This paper proposes a strain transfer efficiency model for the end-bonded method of substrate-type FBG sensors, and conducts numerical analysis on the elastic modulus, Poisson's ratio, and thickness of the bonding adhesive layer, as well as the gauge length of the FBG sensors. Finally, finite element simulation is used to verify the accuracy of the derivation. The results of numerical analysis and finite element simulation show that the proposed model can describe the law of strain transfer in the end-bonded structure of substrate-type FBG sensors and reveal the influence mechanism of each key parameter on the transfer efficiency.
科研通智能强力驱动
Strongly Powered by AbleSci AI