背光
材料科学
液晶显示器
光学
准直光
3D打印
光电子学
液晶
立体显示器
3d打印
阴极射线管
显示设备
视角
光学材料
折射率
Crystal(编程语言)
扩束器
作者
Zi-Jain Zhang,Ding‐Zheng Lin
摘要
This paper presents a novel optical structure designed to enhance the collimation and uniformity of 405 nm LED direct-lit backlight modules. The proposed structure, called the Double-Sided Structure Collimation Film (DSSCF), incorporates a lenticular lens array (LLA), trapezoidal microstructures with apertures, and a highly reflective coating. The lenticular lens array, featuring trapezoidal microstructures and apertures, efficiently converts the diffusive incident light into collimated light. The reflective coating recycles light that does not pass through the slit apertures, improving energy efficiency. We have successfully developed a direct-lit backlight module that achieves optimized collimation, with the full width at half maximum (FWHM) of the first peak intensity in the range of 5° to 10°, and excellent uniformity (> 81%). The module demonstrates a gain of 3.5, about 1.5 (= 3.5/2.3) times higher than the previously reported single-sided structure collimation film (SSSCF). Simulation and experimental results are in close agreement, confirming the robustness of the approach and its potential for scalability in large area collimated backlight module designs. These films may find applications in 3D printing, precision measurement systems, and high-contrast LCDs in the near future.
科研通智能强力驱动
Strongly Powered by AbleSci AI