脱轨
工程类
结构工程
汽车工程
计算机科学
车辆安全
铁路线
工作(物理)
法律工程学
变形(气象学)
作者
Dafu Zhang,Huailong Shi,Pingbo Wu,Jing Zeng,Rongsheng Kuai
标识
DOI:10.1080/23248378.2026.2650723
摘要
Derailment safety is critical for railway vehicle validation. Although most standards and institutions rely on wheel-rail contact force criteria, these methods become fail during instantaneous wheel-rail separation, where geometric assessment serves as an essential complement. This paper presents and validates novel measurement methodologies for wheel lift and wheelset angle of attack, based on EN 14363 twisted track tests. The proposed wheel lift measurement accounts for axle box nodding and wheelset side-rolling. Test results indicate a maximum wheel lift of 3.34 mm—well below the 5 mm limit—and a maximum angle of attack of 1.51°. Through an integrated analysis combining geometric measurements with wheel-rail contact force indicators, the entry and exit sections are identified as critical zones with elevated safety risks when a vehicle traverses a twisted track at low speed. In contrast, the twist section itself exhibits a comparatively lower operational hazard due to the increased vertical wheel loads.
科研通智能强力驱动
Strongly Powered by AbleSci AI