涂层
表面改性
扫描电子显微镜
等离子体电解氧化
钛
氧化物
模拟体液
锶
氧化钛
材料科学
钙
化学工程
化学
粘附
微观结构
电解质
金红石
二氧化钛
核化学
无机化学
冶金
纳米技术
复合材料
有机化学
物理化学
工程类
电极
作者
Huixing Li,Qing Zhao,Dachang Liu,Xiaohui Ni,Xingyuan Zhu,Xiaodong Li,Ren‐Bao Liu,MA Zhi-gang
标识
DOI:10.1166/jbmb.2021.2036
摘要
Titanium (Ti) is a bone tissue replacement material with excellent mechanical properties. However, Ti has poor biological activity and lacks osseointegrative properties and may trigger inflammation and cause implantation failure. To address these issues, Ti surface modification has become a widely used method. In this study, using microarc oxidation (MAO) technology, a strontium-doped MAO coating was prepared on Ti surfaces in an electrolyte solution comprising calcium acetate, calcium glycerophosphate and strontium acetate. Scanning electron microscopy (SEM) and energy spectrum analysis (EDS) were used to analyze the tissue structure and elemental composition of the coating. The surface phase composition of the coating was analyzed by X-ray diffraction (XRD). We observed the proliferation of cells on the coating surface through in vitro cell experiments. The results showed the surface of the strontium-doped MAO coating is porous, and strontium is evenly distributed on the surface. The coating can promote the adhesion, proliferation and differentiation of osteoblasts and has good biological activity and thus, could potentially be applied to the surface of implants in clinical application.
科研通智能强力驱动
Strongly Powered by AbleSci AI