串联
材料科学
钙钛矿(结构)
能量转换效率
太阳能电池
光电子学
兴奋剂
钙钛矿太阳能电池
硅
磁滞
带隙
复合材料
化学
结晶学
物理
量子力学
作者
Khaoula Amri,Rabeb Belghouthi,Michel Aillerie,R. Gharbi
出处
期刊:Energies
[Multidisciplinary Digital Publishing Institute]
日期:2021-06-08
卷期号:14 (12): 3383-3383
被引量:51
摘要
In this work, simulations were performed to optimize the parameters of a lead-free perovskite/silicon tandem solar cell for the improved efficiency and stability of commercial devices. The top sub-cell is based on a lead-free perovskite with a large bandgap of 1.8 eV, an electron transport layer of SnO2/PCBM, which is known for its anti-hysteresis effect, and a hole transport layer of NiO to improve stability, whereas the bottom sub-cell is based on n-type silicon to increase the efficiency of the whole cell. First, the two sub-cells were simulated under standalone conditions for calibration purposes. Then, the current matching condition was obtained by optimizing the thicknesses of the absorber layers of both sub-cells and the doping concentration of the back surface field (BSF) layer of the silicon sub-cell. As a result of this optimization phase, thicknesses of 380 nm and 20 µm for the top and bottom sub-cells, respectively, and a doping concentration of 1022 cm–3 were used in the configuration of the tandem cell, yielding a large open-circuit voltage of 1.76 V and a power conversion efficiency of 24.4% for the whole cell. Finally, the effect of the working temperature was evaluated, and the results reveal that the high performance of lead-free perovskite sub-cells is less affected by an increase in temperature compared to lead-based solar cells, such as those based on CH3NH3PbI3 perovskite.
科研通智能强力驱动
Strongly Powered by AbleSci AI