Effect of pectin and attapulgite filler on swelling, network parameters and controlled release of diltiazem hydrochloride from polyacrylic copolymer gel

Pectin grafted polyacrylic copolymer hydrogels were made by free radical crosslink copolymerization of acrylic acid (AA) and acrylamide (AM) in an aqueous solution of pectin. N′N-methylene bis acrylamide (MBA) was used as a crosslinker. During the polymerization reaction the attapulgite (APG) filler was also incorporated in situ into the network of the copolymer gel. Several filled hydrogels were prepared by varying the amount of pectin and APG filler. These hydrogels were characterized by FTIR, 13C NMR, XRD, TGA, SEM, mechanical properties, DMA, swelling, diffusion characteristics and network parameters. The release kinetics of a model drug diltiazem hydrochloride (DT) was studied with these hydrogels. The wt% of pectin, APG and MBA was optimized with a central composite design (CCD) model of response surface methodology (RSM) with equilibrium swelling ratio (ESR), drug adsorption (mg/100 mg gel) and drug release% in 16 h as response. Accordingly, the hydrogel prepared with 5:1 AA:AM molar ratio, 25 wt% monomer concentration, 1% each of initiator and MBA concentration, 18 wt% pectin and 2 wt% APG showed an optimized ESR of 17.75, drug loading of 27.58 and a drug release % of 92.5 in 16 h at a solution pH of 7.4.