Investigating and modeling the effect of light intensity on Rhodopseudomonas palustris growth

Photosynthetic bacteria can be useful biotechnological tools-they produce a variety of valuable products, including high purity hydrogen, and can simultaneously treat recalcitrant wastewaters. However, while photobioreactors have been designed and modeled for photosynthetic algae and cyanobacteria, there has been less work on understanding the effect of light in photosynthetic bacterial fermentations. To design photobioreactors, and processes using these organisms, robust models of light penetration, utilization, and conversion are needed. This stydy uses experimental data from a tubular photobioreactor designed to focus in on light intensity effects, to model the effect of light intensity on the growth of Rhodopseudomonas palustris, a model photosynthetic bacterium. The work demonstrates that growth is controlled by light intensity, and that this organism does experience photolimitation below 200 W/m2 and photoinhibition above 600 W/m2 . This has implications for outdoor applications, as there will be low growth during the periods of limited light, and growth may be inhibited during the light intensive hours of mid-day. Further, the work presents a model for light penetration in cylindrical photobioreactors, which tends to be the most common geometry. The model developed showed good fit to the experimental data for each light intensity investigated, with high R2 values and NRMSE values all below 20%. The work extends the modeling tools for these organisms, and will allow for better photobioreactor design, and the integration of modeling tools in designing processes which use photosynthetic bacteria.