填充
材料科学
3d打印
复合材料
抗冲击性
抗性(生态学)
结构工程
法律工程学
工程类
制造工程
生态学
生物
作者
Muhamed Bisić,Adi Pandžić,Merim Jusufbegović,Mujo Ćerimović,Predrag Elek
出处
期刊:Polymers
[Multidisciplinary Digital Publishing Institute]
日期:2025-07-02
卷期号:17 (13): 1854-1854
被引量:4
标识
DOI:10.3390/polym17131854
摘要
Recent technological advances have expanded the use of 3D-printed polymer components across industries, including a growing interest in military applications. The effective defensive use of such materials depends on a thorough understanding of polymer properties, printing techniques, structural design, and influencing parameters. This paper analyzes the ballistic resistance of 3D-printed polymer structures against 9 × 19 mm projectiles. Cuboid targets with different infill patterns-cubic, grid, honeycomb, and gyroid-were fabricated and tested experimentally using live ammunition. Post-impact, CT scans were used to non-destructively measure projectile penetration depths. The honeycomb infill demonstrated superior bullet-stopping performance. Additionally, mechanical properties were experimentally determined and applied in FEM simulations, confirming the ability of commercial software to predict projectile-target interaction in complex geometries. A simplified analytical model also produced satisfactory agreement with experimental observations. The results contribute to a better understanding of impact behavior in 3D-printed polymer structures, supporting their potential application in defense systems.
科研通智能强力驱动
Strongly Powered by AbleSci AI