钙钛矿(结构)
量子点
表面改性
碘化物
兴奋剂
材料科学
对偶(语法数字)
光电子学
纳米技术
化学
无机化学
结晶学
物理化学
艺术
文学类
作者
Shulan Zhang,Renjie Chen,Mujing Qu,Biyu Long,Nannan He,Sumei M. Huang,Xiaohong Chen,Huili Li,Tongtong Xuan
出处
期刊:Coatings
[Multidisciplinary Digital Publishing Institute]
日期:2024-03-29
卷期号:14 (4): 409-409
被引量:4
标识
DOI:10.3390/coatings14040409
摘要
High-quality perovskite films (PFs) are crucial for achieving high-performance perovskite solar cells (PSCs). Herein, we report a dual-modification strategy via incorporating CsPbBr3 QDs into MAPbI3 perovskite bulk and capping the interface of the perovskite/hole transport layer (HTL) with phenylethylamine iodide (PEAI) to improve perovskite crystallinity and interface contact properties to acquire high-quality PFs with fewer defects. CsPbBr3 QDs promoted perovskite grain growth and reduced bulk defects, while PEAI surface modification passivated interfaces, improved hydrophobic properties, and prevented carrier recombination at the perovskite/HTL interface. Benefiting from growth control and the effective suppression of both bulk and interface carrier recombination, the resulting devices show a greatly improved photoelectric conversion efficiency (PCE) from 17.21% of the reference cells to 21.04% with a champion Voc of 1.15 V, Jsc of 23.30 mA/cm2, and fill factor (FF) of 78.6%. Furthermore, the dual-modification strategy endows PFs with promoted moisture tolerance, and the nonencapsulated PSCs retain 75% of their initial efficiency after aging for 30 days at 40% relative humidity and room temperature, which is significantly higher than the 59% value of the original PSCs. Good operational stability and the maintained efficiency of the target device over time suggest the potential for future commercialization.
科研通智能强力驱动
Strongly Powered by AbleSci AI