Thermal Processing Creates Water‐Stable PEDOT:PSS Films for Bioelectronics

Organic mixed ionic-electronic conductors have emerged as a key material for the development of bioelectronic devices due to their soft mechanical properties, biocompatibility, and high volumetric capacitance. In particular, PEDOT:PSS has become a choice material because it is highly conductive, easily processible, and commercially available. However, PEDOT:PSS is dispersible in water, leading to delamination of films when exposed to biological environments. For this reason, chemical cross-linking agents such as (3-glycidyloxypropyl)trimethoxysilane (GOPS) are used to stabilize PEDOT:PSS films in water, but at the cost of decreased electrical performance. Here, it is shown that PEDOT:PSS thin films become water-stable by simply baking at high temperatures (>150 °C) for a short time (≈ 2 min). It is shown that heat-treated PEDOT:PSS films are as stable as their chemically-cross-linked counterparts, with their performance maintained for >20 days both in vitro and in vivo. The heat-treated films eliminate electrically insulating cross-linkers, resulting in a 3× increase in volumetric capacitance. Applying thermal energy using a focused femtosecond laser enables direct patterning of 3D PEDOT:PSS microstructures. The thermal treatment method is compatible with a wide range of substrates and is readily substituted into existing workflows for manufacturing devices, enabling its rapid adoption in the field of bioelectronics.