尖晶石
涂层
材料科学
图层(电子)
固体氧化物燃料电池
扩散
氧化物
冶金
复合材料
化学
电极
阳极
热力学
物理
物理化学
作者
Maosen Zhao,Shujiang Geng,Gang Chen,Fuhui Wang
标识
DOI:10.1016/j.ijhydene.2023.10.030
摘要
A reactive element layer is introduced into the coating system to enhance the properties of FeCoNi coating for solid oxide fuel cell interconnects. An FeCoNi/CeO2 dual-layer coating is produced on stainless steel by sol-gel and magnetron sputtering, which is subsequently exposed to 800 °C for a duration of up to 20 weeks. The thermal treatment results in the formation of (Fe,Co,Ni)3O4 spinel and (Ni,Co)O, with CeO2 embedded in Cr2O3 that formed beneath the spinel. The FeCoNi/CeO2 coating demonstrates better effectiveness than FeCoNi coating in acting as a barrier against Cr out-diffusion. Moreover, adding CeO2 significantly suppresses the interfacial reaction of Cr2O3 and spinel. An area-specific resistance of 10 mΩ cm2 is obtained for the FeCoNi/CeO2 coated steel at 800 °C after 20 weeks.
科研通智能强力驱动
Strongly Powered by AbleSci AI