期刊:Energy & Fuels [American Chemical Society] 日期:2025-01-04卷期号:39 (2): 1418-1431被引量:7
标识
DOI:10.1021/acs.energyfuels.4c05582
摘要
High Resolution Image Download MS PowerPoint Slide In the quest to realize mechanically and chemically robust, highly conductive anion exchange membranes (AEMs), herein, poly(fluorene)s with alkyl-tethered piperidinium (QPip- x; x stands for targeted ion exchange capacity) or trimethylammonium (QAF- x ) cations were synthesized, and the relation between the cationic headgroup structure and resulting membrane properties was investigated. AEMs with rigid poly(fluorene) backbones decorated with dihexyl hydrophobic chains as one of the components and alkyl-tethered cationic head groups as the other component exhibited a good combination of high hydroxide ion conductivity and dimensional stability. Piperidinium cation-tethered poly(fluorene)s demonstrated better chemical stability than trimethylammonium cation-tethered poly(fluorene)s during harsh alkaline stability tests in 8 M KOH at 80 °C for 1000 h. In particular, after this test, the QPip-3.00 membrane retained 78% of its initial conductivity. The AEM water electrolysis (AEMWE) single cell integrated with the QPip-3.00 membrane and non-PGM anode catalyst (Ni 0.8 Co 0.2 O) achieved a high current density of 2.0 A cm –2 at a low cell voltage of 1.69 V. This cell was operable for 1000 h at a constant current density of 1.0 A cm –2 at 80 °C with a minor voltage decay of 58.6 μV h –1 following the initial voltage jump. The high performance and durability of the QPip-3.00 membrane during AEMWE proved its promising applicability in hydrogen-based electrochemical devices.