Facile preparation of Au-loaded mesoporous In2O3 nanoparticles with improved ethanol sensing performance

The in situ monitoring of toxic volatile organic compound gases using metal oxide-based gas sensors is still challenging. Herein, mesoporous In2O3 nanoparticles, assembled using smaller nanoparticles, were synthesized via a facile solvothermal method and used to load Au nanoparticles to prepare mesoporous Au/In2O3 for ethanol detection. The obtained In2O3 and Au/In2O3 were meticulously analysed by XRD, SEM, BET, TEM and XPS techniques. It was revealed that Au nanoparticles were uniformly distributed on mesoporous In2O3 nanoparticles. Notably, the obtained mesoporous 1% Au/In2O3 is highly sensitive to ethanol gas at an optimal working temperature of 180 °C, showing a response of 55 to 50 ppm of ethanol, which is considerably higher compared to that of In2O3 nanoparticles. The significantly enhanced sensitivity results from the electronic and chemical sensitization effects of Au nanoparticles. Moreover, the mesoporous Au/In2O3 nanoparticles also showed eminent selectivity, short response/recovery time, low detection limit, good linear relationship, superb repeatability, and wonderful long-term stability, suggesting that Au/In2O3 nanoparticles have great potential application for in situ monitoring of ethanol gas.