光子学
材料科学
集成电路
光电子学
热的
互连
光子集成电路
倒装芯片
收发机
散热片
串扰
硅光子学
硅
生产线后端
电子线路
集成平台
电子包装
电子工程
电气工程
工程类
计算机科学
纳米技术
物理
CMOS芯片
电信
图层(电子)
胶粘剂
数据库
气象学
电介质
复合材料
作者
David Coenen,Minkyu Kim,Herman Oprins,Yoojin Ban,Dimitrios Velenis,Joris Van Campenhout,Ingrid De Wolf
出处
期刊:Journal of optical microsystems
[SPIE]
日期:2023-12-06
卷期号:4 (01): 1-14
被引量:14
标识
DOI:10.1117/1.jom.4.1.011004
摘要
Co-packaged optics for high performance computing or other data center applications requires dense integration of silicon photonic integrated circuits (PICs) with electronic integrated circuits (EICs). This work discusses the impact of three-dimensional (3D) hybrid integration on the thermal performance of Si ring-based photonic devices in wavelength-division multiplexing PICs. A thermal finite element model of the EIC-PIC assembly is developed and calibrated with thermo-optic device measurements, before and after integration of an electrical driver on top of the PIC by means of microbump flip-chip bonding. Both measurements and simulations of the thermal tuning efficiency and crosstalk between silicon photonic devices show that the EIC can have a significant impact on the thermal performance of the integrated heaters in the PIC by acting as an undesired heat spreader. This heat spreading lowers the heater efficiency with 43.3% and increases the thermal crosstalk between the devices by up to 44.4% compared with a PIC-only case. Finally, it is shown that these negative thermal effects of 3D integration can largely be mitigated by a thermally aware design of the microbump array and the back-end-of-line interconnect, guided by the calibrated thermal simulation model.
科研通智能强力驱动
Strongly Powered by AbleSci AI