材料科学
ABS树脂
聚氨酯
复合材料
丙烯腈
热塑性聚氨酯
热塑性塑料
苯乙烯
热塑性弹性体
共聚物
聚合物
弹性体
作者
Sara Khaleghi,Taher Azdast,Rezgar Hasanzadeh,Chul B. Park,Asghar Rasouli
摘要
Abstract This study investigates the cell structure control in 50% thermoplastic polyurethane (TPU) and 50% acrylonitrile butadiene styrene (ABS) blend foam using CO 2 as a physical blowing agent, focusing on the effects of variable foaming parameters on the microstructure. Samples measuring 25 × 25 × 1 mm were produced and analyzed for foam structure. The foaming process involved saturating the samples with CO 2 gas at pressures of 4, 5.5, and 7 MPa, followed by rapid pressure release and immersion in a hot glycerol bath. The foaming parameters included varied temperatures (80, 90, and 120°C) and times (5–80 s). Scanning electron microscope (SEM) analysis provided data on cell size and density. Results indicated that increasing the saturation pressure enhanced CO 2 uptake in the ABS/TPU blend, with the CO 2 uptake rate peaking early in the process. Higher foaming temperatures and extended foaming times led to increased cell size, cell density, and expansion ratio. These findings highlight the significant role of process parameters in controlling the cell structure of ABS/TPU blend foams, offering valuable insights into optimizing foam properties for industrial applications. Highlights Optimization of foam parameters leads to cell structure control in ABS/TPU composite foams for industrial applications. Increasing saturation pressure significantly boosts CO 2 uptake in ABS/TPU composite foams. Increasing the foaming temperature and duration leads to larger cell sizes, higher cell density, and greater expansion ratios in ABS/TPU composite foams.
科研通智能强力驱动
Strongly Powered by AbleSci AI