材料科学
合金
压痕硬度
体积分数
微观结构
电阻率和电导率
降水
变形(气象学)
冶金
相(物质)
电导率
复合材料
电气工程
化学
物理
有机化学
物理化学
气象学
工程类
作者
Junfeng Wang,Shu Guo Jia,Shao Hua Chen,Ke Song,Ping Liu,Guo Jun Yu
出处
期刊:Advanced Materials Research
[Trans Tech Publications]
日期:2011-02-21
卷期号:197-198: 1315-1320
被引量:16
标识
DOI:10.4028/www.scientific.net/amr.197-198.1315
摘要
The Cu-Ni-Si-Mg alloy was treated by aging after varying cold deformation. The effect of cold deformation, aging temperature and aging time on the microstructure and properties of the alloy were investigated. The results indicate that the alloy produce a larger number of slip bands and dislocations after cold deformation, it can accelerate the precipitation of phase during aging, improve the microhardness and electrical conductivity. The microhardness and electrical conductivity of the alloy with 80% deformation aging at 723 K for 1h are 242HV and 35.53%IACS, respectively. The volume fraction of the precipitated phase was calculated by measuring the electrical conductivity of the alloy with 80% deformation aging at 773 K, then both the equations of phase transformation and the electrical conductivity equation were obtained.
科研通智能强力驱动
Strongly Powered by AbleSci AI