Utilization and life cycle assessment of low activity solid waste as cementitious materials: A case study of titanium slag and granulated blast furnace slag

The dumping of cement production and industrial solid waste can cause severe environmental impact. In order to reduce the environmental impact of cement production and reasonably dispose of solid waste, a new type of cementing material was developed using industrial solid waste as raw materials. It solves the problem that low activity solid waste is difficult to reuse and makes up for the less research, which considered both preparation and environmental evaluation. The orthogonal tests of cement mortar strength as well as life cycle assessment were carried out. The results from variance and range analyses of the orthogonal tests revealed that the fraction of solid waste mainly affected the compressive strength of the solid waste cement mortar, and its specific surface area primarily influenced the flexural strength. After curing for 28 days, the compressive and flexural strength values of the developed cementing material were 40.6 MPa and 8.6 MPa, respectively. The results of life cycle impact assessment indicated that the developed solid waste cement had more environmental advantages than ordinary cement in 18 midpoints environmental impact types, and could diminish environmental impact by 16.1 % on the whole. The solid waste cement has achieved great environmental gains in the human toxicity, natural land transformation, metal depletion, climate change and other environmental impact categories. In addition, the clinker calcination, transportation and material mining were identified as critical processes responsible for the human toxicity, natural land transformation and metal depletion. Through sensitivity and uncertainty analyses, the development of the solid waste cement was proved to be the most effective method to decrease the environmental impact of cement. Finally, the methods of further reducing the environmental impact of cement were proposed.