氧化还原
阴极
动力学
硫黄
材料科学
化学
化学工程
纳米技术
无机化学
冶金
物理化学
工程类
物理
量子力学
作者
Chen Cheng,Hanyan Wu,Xinyang Chen,Shuiping Cai,Yingkang Tian,Xiaofei Yang,Xuejie Gao
出处
期刊:Molecules
[Multidisciplinary Digital Publishing Institute]
日期:2024-04-17
卷期号:29 (8): 1833-1833
被引量:4
标识
DOI:10.3390/molecules29081833
摘要
Lithium–sulfur (Li-S) batteries have received much attention due to their high energy density and low price. In recent years, alleviating the volume expansion and suppressing the shuttle effect during the charge and discharge processes of Li-S batteries have been widely addressed. However, the slow conversion kinetics from polysulfide (LiPSs) to Li2S2/Li2S still limits the application of Li-S batteries. Therefore, we designed a ZIF-67 grown on cellulose (named ZIF-67@CL) as an electrocatalyst to improve the interconversion kinetics from LiPSs to Li2S2/Li2S for Li-S batteries. Based on the results of adsorption experiments of LiPSs, ZIF-67@CL and CL hosts were immersed in Li2S4 solution to adsorb LiPSs, and the UV-Vis test was conducted on the supernatant after adsorption. The results showed that the ZIF-67@CL had a stronger adsorption for LiPSs compared with the cellulose (CL). Furthermore, in the Li2S nucleation tests, the fabricated cells were galvanostatically discharged to 2.06 V at 0.112 mA and then potentiostatically discharged at 2.05 V. Based on the results of Li2S nucleation tests, the catalytic effect of ZIF-67 was further verified. As a result, the sulfur cathode used a ZIF-67 catalyst (named S/ZIF-67@CL) and delivered an initial capacity of 1346 mAh g−1 at a current density of 0.2 C. Even at a high current density of 2 C, it exhibited a high-capacity performance of 1087 mAh g−1 on the first cycle and maintained a capacity output of 462 mAh g−1 after 150 cycles, with a Coulombic efficiency of over 99.82%.
科研通智能强力驱动
Strongly Powered by AbleSci AI