超级电容器
电化学
材料科学
阳极
阴极
电池(电)
电极
化学工程
碳纳米管
球磨机
电容
纳米技术
复合材料
化学
物理
工程类
物理化学
功率(物理)
量子力学
作者
Pei Gao,Boxiong Shen,Peng Zhao,Guofei Shi,Xiaolan Zhao
标识
DOI:10.1016/j.jpowsour.2023.233231
摘要
Recycling metal resources from spent battery powder to prepare electrode materials is an eco-friendly and sustainable strategy. However, direct utilization of spent battery powder is mostly ignored, and the prepared electrode materials by this approach exhibit limited electrochemical performance. Herein, we employ unpurified spent zinc-carbon battery powder (SP) and carbon nanotubes (CNTs) as raw materials to fabricate SP/CNTs via the ball milling method, and then use a novel electrochemical activation strategy to obtain oxygen vacancy-rich [email protected] ([email protected]) materials. Under the combined action of CNTs doping and oxygen vacancies caused by the tuning of Mn2+/Mn3+ ratio via the electrochemical activation strategy, the optimum electrode ([email protected]) for supercapacitor shows the specific capacitance of 443.9 F g−1 at 1 A g−1, which is nearly six and three times higher than that of SP and SP/CNTs electrodes, respectively. Additionally, the packaged asymmetric supercapacitor (ASC) device with [email protected] as the cathode and commercial active carbon (AC) as the anode manifests a large energy density of 25.51 Wh·kg−1 at the power density of 399.98 W kg−1, and the capacity retention of 88.58% after 10,000 cycles at 4 A g−1. This work opens up a new way for the direct utilization of SP to prepare high-performance supercapacitor electrode materials.
科研通智能强力驱动
Strongly Powered by AbleSci AI