材料科学
导电体
复合材料
热导率
剪切(物理)
聚二甲基硅氧烷
热的
电子设备和系统的热管理
纳米颗粒
填料(材料)
纳米技术
机械工程
物理
工程类
气象学
作者
Hongyi Zhu,Shunxia Wu,Rui Yin Tang,Yang Li,Gang Chen,Bingxue Huang,Biyou Peng
出处
期刊:Polymers
[Multidisciplinary Digital Publishing Institute]
日期:2024-05-24
卷期号:16 (11): 1491-1491
被引量:20
标识
DOI:10.3390/polym16111491
摘要
Electronic devices play an increasingly vital role in modern society, and heat accumulation is a major concern during device development, which causes strong market demand for thermal conductivity materials and components. In this paper, a novel thermal conductive material consisting of polydimethylsiloxane (PDMS) and a binary filler system of h-BN platelets and Al2O3 nanoparticles was successfully fabricated using direct ink writing (DIW) 3D printing technology. The addictive manufacturing process not only endows the DIW-printed composites with various geometries but also promotes the construction of a 3D structural thermal conductive network through the shearing force during the printing process. Moreover, the integrity of the thermal conductive network can be optimized by filling the gaps between the BN platelets with Al2O3 particles. Resultingly, the configuration of the binary fillers is arranged by the shearing force during the DIW process, fabricating the thermal conductive network of oriented fillers. The DIW-printed BN/Al2O3/PDMS with 45 wt% thermal conductive binary filler can reach a thermal conductivity of 0.98 W/(m·K), higher than the 0.62 W/(m·K) of the control sample. In this study, a novel strategy for the thermal conductive performance improvement of composites based on DIW technology is successfully verified, paving a new way for thermal management.
科研通智能强力驱动
Strongly Powered by AbleSci AI