Nickel-based alloy efficient milling with ceramic tool and experimental verification in closed impeller

Nickel-based alloys are a class of materials that possess exceptional properties, including superior corrosion, oxidation, and fatigue resistance. They are increasingly utilized in high-performance critical components, particularly in the fields of aerospace engines and gas turbines. Nickel-based alloys pose significant challenges during machining due to their high cutting forces and work hardening, leading to low machining efficiency, severe tool wear, and subpar surface quality of the machined parts. To address these challenges, an orthogonal cutting experiment was conducted on GH4061 alloy to evaluate the machining performance by using monolithic ceramic milling tools. The optimal cutting parameters combination for dry cutting of nickel-based alloys was determined. The surface quality was tested and analyzed, including surface micro structure, residual stress, and surface roughness. The machining experiment was conducted on GH4061 closed impeller. The results demonstrated that high-speed cutting was more effective than low-speed cutting in improving the surface quality of the machined part. In the rough processing, monolithic ceramic milling tools was used to quickly remove the excess material. The adhesive and diffusion effects mainly contributing to the wear of the monolithic ceramic tool in GH4061 milling. Average surface roughness 1.41 μm can be obtained through dry milling using a monolithic ceramic tool with cutting speed 602.88 m/min, cutting depth 0.3 mm, cutting width 6 mm and feed per tooth 0.03 mm/z, along with metal removal rate 5184 mm 3 /min. High cutting speed will resulting in relatively low residual stress in the surface layer as well as a lower thickness of the surface alternation layer. Finally, a physical GH4061 closed impeller was machined to verify the proposed milling method.