Development of hydrophobic polyurethane film from structurally modified castor oil and its anticorrosive performance

Abstract Hydrophobic polyurethane (PU) films are widely used for various commercial and industrial applications due to their excellent water repelling and self‐cleaning property. Nevertheless, achieving appreciable hydrophobicity in PU film is quite a challenge. Herein, we report on the development of a novel hydrophobic PU (fluorinated polyurethane [FCO‐PU]) film and comprehensively evaluate its anticorrosive property. The FCO‐PU was prepared by structural modification of castor oil (CO) through attachment of long fluorocarbon chains as pendant groups onto the backbone of CO. A model PU film (CO‐PU) was also prepared from unmodified CO to compare the properties of FCO‐PU film. All intermediate compounds, FCO‐PU and CO‐PU films were characterized by various spectroscopic techniques. Morphological, thermal and mechanical properties of the PU films were analyzed by field emission scanning electron microscopy (FESEM), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), and dynamic mechanical thermal analysis (DMTA) studies. Successful introduction of long fluorocarbon chains into the FCO‐PU film is reflected by its high hydrophobicity with a water contact angle of 119.1°, compared to the model CO‐PU film with a water contact angle of 84.4°. Anticorrosive properties of the PU films were evaluated by polarization technique and electrochemical impedance spectroscopy under corrosive environment and the obtained results reveal a significant corrosion resistance (corrosion rate: 6.72 × 10−6 mm/year) behavior by the FCO‐PU film. This work represents an effective strategy for the backbone modification of CO to develop novel functional PU materials.