过程(计算)
灌封
涂层
热的
机械工程
保温
可靠性(半导体)
材料科学
工程类
工程制图
流量(数学)
绘画
组分(热力学)
传输(电信)
结构工程
剪切(地质)
信号(编程语言)
表面处理
频道(广播)
曲面(拓扑)
剪切力
抗剪强度(土壤)
表面贴装技术
空气动力学
物流
作者
DANG Wen-wei, LI Xiao-sheng
标识
DOI:10.16577/j.issn.1001-1560.2023.0017
摘要
The cable-fairing assembly is an important part of the aircraft, which bears a large amount of aerodynamic and thermal loads during high-speed flight. The internal cable of such assembly is an important channel for information transmission between various systems and an important component to ensure signal input and output. In this paper, a painting process for the inner surface of cable-fairing assembly was discussed. The process flow contained spraying of inner thermal insulation layer, cable fixing and cable potting, which provided a process guarantee for the reliability of products. The performance test results of the cable-fairing assembly after painting showed that the shear strength of the thermal insulation coating on the inner surface, the mechanical properties of the potting body and the electrical properties of the cable all met the design index requirements.
科研通智能强力驱动
Strongly Powered by AbleSci AI