研磨
钻石
材料科学
表面粗糙度
Crystal(编程语言)
金刚石研磨
超声波传感器
表面光洁度
复合材料
冶金
粒度
复合数
固有频率
振幅
金刚石切割
平面磨削
金刚石工具
表面完整性
振动
曲面(拓扑)
抛光
机械工程
作者
Leigang PEI,Guangfeng SHI,Jiazeng CHEN,Dong YAO,Yongming YANG,Junye LI
标识
DOI:10.13394/j.cnki.jgszz.2023.0060
摘要
To improve the surface quality of natural diamond grinding, the ultrasonic vibration was introduced for composite grinding, and an inelastic collision theory model was established to calculate the amplitude of ultrasonic vibration. The effects of ultrasonic amplitude, grinding speed and grinding grain size on the material removal of natural diamond (100) crystal surface were studied, and the optimal process parameters were sought. The results show that the ultrasonic amplitude ranges from 3.1 to 8.7 μm in the direction of easy grinding of natural diamond (110) crystal surface and 2.9 to 9.1 μm in the direction of easy grinding of natural diamond (100) crystal surface. The optimal process combination parameters of natural diamond (100) crystal surface grinding obtained by orthogonal experiment are ultrasonic amplitude of 6.0 μm, grinding disk speed of 2 800 r/min, diamond grinding grain size code of M3/6. The surface roughness Ra of diamond (100) crystal surface after ultrasonic assisted grinding is 16.21 nm, which is 63.83% lower than that of traditional mechanical grinding. Ultrasonic assisted grinding of natural diamonds can achieve better surface quality than traditional mechanical grinding.
科研通智能强力驱动
Strongly Powered by AbleSci AI