催化作用
坡缕石
甲烷
空间速度
碳纤维
X射线光电子能谱
拉曼光谱
化学工程
化学
材料科学
无机化学
矿物学
粘土矿物
有机化学
复合材料
选择性
复合数
物理
光学
工程类
作者
Ye Chen,Tianhu Chen,Haibo Liu,Ping Zhang,Can Wang,Shiwei Dong,Dong Chen,Jingjing Xie,Xuehua Zou,Steven L. Suib,Chunsheng Li
标识
DOI:10.1016/j.clay.2020.105498
摘要
Abstract The Al-promoted Ni-based catalysts were prepared by co-precipitation method using natural clay mineral-palygorskite (Pal) as the support. The physicochemical properties of the catalysts were studied by XRD, BET, H2-TPR, TEM, XPS and Raman spectroscopy. The catalytic performances of the catalysts for CO2 reforming of methane (DRM) were investigated under different parameters including Al content, reaction temperatures, CH4 concentration and gas hourly space velocity (GHSV), and the long-term stability was also evaluated. The results showed that the addition of Al apparently favored the catalytic activity and stability of the catalysts for DRM reactions. The Ni/Pal catalyst with Al content of 8% (Ni8/Al8/Pal) exhibited the best activity for DRM at 700 °C in terms of the CH4 and CO2 conversions, which was related to the high dispersion and small crystal sizes of Ni particles. The variations of CH4 concentration and GHSV showed little effect on the catalytic activity of Ni8/Al8/Pal for CH4 conversion. Long-term stability (140 h) and H2/CO molar ratio of roughly 0.98 can be achieved. The carbon deposition of the spent catalysts indicated that mainly graphite-type carbon deposition was formed on the surface of the catalysts when Al content was lower than 8%; however, most of the carbon deposition was removed over the Ni8/Al8/Pal and Ni8/Al15/Pal catalysts.
科研通智能强力驱动
Strongly Powered by AbleSci AI